iloom LINKI PLUS LED Task Lamp w/ 3-Mode Reading Light (Fits Smart Desk)
LED desk lighting that creates a good learning environment with pull-out lighting. It consists of a low power consumption and long-life LED lamp, and the brightness can be adjusted in 5 steps, and the lighting mode can be selected according to the lear
LED desk lighting that creates a good learning environment with pull-out lighting.
It consists of a low power consumption and long-life LED lamp, and the brightness can be adjusted in 5 steps, and the lighting mode can be selected according to the learning area.
LED desk light
Brightness: 400 ~ 1600lux (installation height485mmstandard)
· Brightness control : 5 levels
· Color Temp : 3500K ( window ) / 5000K ( language ) / 6000K ( explore )
· Lifespan : 40,000 hours
· Draw-out type
- Voltage : DC 24V / 1A (100 ~ 240V / 50 ~ 60Hz)
· Power consumption : 20W
power
· When the button is pressed, the lamp of the previously used mode lights up .
*If you unplug the product and plug it back in, the settings will be reset.
brightness adjustment
The brightness can be adjusted in 5 steps .
timer
The lamp turns off automatically after 50 minutes when the timer is running .
It is convenient to use as a bed light at night .
learning light effect
You can create an optimal learning environment by setting the modes for each learning, such as Creative , Language , and Exploration .
* When the power is off, the learning area button does not work
Repair area MODE (COOL WHITE)
Color temperature: 6500K / Brightness: 1050~570lux
Language area MODE (NATURAL WHITE)
Color temperature : 5000K / Brightness : 1350~340lux
Creative area MODE (WARM WHITE)
Color temperature: 3500K / Brightness: 870~480lux
Pull-out lighting for correct posture
Press the middle part of the light illuminating a maximum of 11cm to be pulled out gently towards you .
One trillion people have drawn wide spread light evenly and gives help to maintain the correct posture , it helps create a more comfortable environment .
Precautions
· Be careful that the rail may be damaged if excessive force is applied or pressed from the top down.
· Use the dedicated adapter for power connection.
· Do not disassemble, repair, or remodel arbitrarily.
· Before using the product, be sure to read the user manual thoroughly before use.
Notes on installation
· It is recommended to install it under a three-tiered shelf (mobile shelf) in a front desk or stacked desk that does not interfere with the lower shelf
· In the case of Linki Plus series, the upper door cannot be attached as interference occurs when lighting is installed on the 4 shelf shelf.
· Can be installed Series: linkage, linkage Plus, Roy, Roy mono, Neo Ithaca
*In the case of a linki, boring is carried out on site, and after installation, the light protrudes 3~4cm from the shelf.
*Product color may differ from actual color depending on your monitor
Size
832*250*28
Material
panel LED
Body aluminum, plastic (ABS), STEEL
*Product specifications are subject to change
Product management tips
Remove everyday dust with a dry cloth, and wipe off contamination in daily life with a wet cloth, then wipe with a dry towel immediately.
If the contamination is severe, wipe it with a cloth moistened with diluted neutral detergent, and wipe it with a dry cloth to prevent moisture from permeating the product without damaging the product.
INTERIOR TYPE
Create a learning environment where you can maintain a good posture and focus with pull-out lighting.